Jim,
I'm not sure how applicable it is to your radio, but FWIW my old OMNI-D is
the same way.
If you adjust the headphone volume for usable level in a set of headphones,
you can't hear it at all through the speaker. I've been wanting to do a mod
that corrected this, or if not correct it then just bring the volume control
out so that it can be adjusted.
73,
Mark W1EOF
> -----Original Message-----
> From: tentec-bounces@contesting.com
> [mailto:tentec-bounces@contesting.com]On Behalf Of james murray
> Sent: Thursday, February 05, 2004 12:43 AM
> To: tentec@contesting.com
> Subject: [TenTec] Omni V - sidetone/headphone problem?
>
> Picked up a nice used Omni V and very impressed with it so far.
> One problem I came up with is that when I put the headphones on
> the first time the sidetone rattled my eardrums a bit. In order
> to use headphones I had to turn the sidetone all the way down.
> When I pull the phones out sidetone is barely audible. Headphones are
> Yaesu YH-55, 8ohm. Manual says 4-16 ohms. Any ideas.
> tnx,
> Jim/k2hn
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|