"Xtal filter - 500 (or 1000 if you don't have the 500)
DSP BW - 600 (adjust lower for QRM)
Threshold - ~21 uV (vary +/- depending on QRN)
Decay - 20 dB/S (vary +/- depending on QRN)
RF Gain - 100 (may need to vary down)"
* * *
"P.S. If you set Threshold very high (64-192) with very
narrow DSP BW (100-120) you will need to lower it
later if you increase DSP BW since they interact."
Hello, Bill, W4ZV et al: Reading the above makes my brain hurt. No wonder
I'm still using an OMNI VI! I'd be a fish out of water with one o' them
newfangled Orions, fer shur. But I wish the early adapters well--good luck
and Godspeed.
73,
John, W3ULS
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|