TenTec
[Top] [All Lists]

Re: [TenTec] scout display problem with 40 meter module

To: tentec@contesting.com
Subject: Re: [TenTec] scout display problem with 40 meter module
From: Bwana Bob <wb2vuf@qsl.net>
Reply-to: wb2vuf@qsl.net, tentec@contesting.com
Date: Sat, 22 Nov 2003 22:40:54 -0500
List-post: <mailto:tentec@contesting.com>
Mike:

Sounds like RF is getting into it. Perhaps one of the grounds is
marginal. Make sure the contacts are clean.

                        73,

                        Bob WB2VUF

MIKE BRYCE wrote:
> 
> here's an unusual problem.
> 
> I have two scout transceivers. two forty modules.
> 
> one of the modules causes the display to become unstable when in transmit on
> ssb. cw seems to be fine. it's the module, because I can move it from one
> radio to the other and the problem follows the module.
> 
> so, after I have taken the module apart and looked for the obvious broken
> solder joints, has anyone ever had this problem with a band module?
> 
> Mike Bryce, WB8VGE
> SunLight Energy Systems
> 
> http://www.seslogic.com
> http://www.theheathkitshop.com
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>