me, too! I totally agree with Steve.
Please let us know.
Thanks /73
Tom Sessions
k4rv@mindspring.com
Never do today what you can put off until tomorrow.
> [Original Message]
> From: Steve <sswhite@mchsi.com>
> To: <tentec@contesting.com>
To: <tentec@contesting.com>
> Date: 8/4/2003 03:32:21
> Subject: Re: [TenTec] OMNI 546 cabinet covering
>
> Don
>
> When you get this figured out and you determine a source for the black
> covering and a process to take off the old and put on the new I know there
> will be many interested in what you did and where you got it. I know I
> would.
>
> Steve NU0P
> ----- Original Message -----
> From: "Tom North" <tomnorth@airmail.net>
> To: <tentec@contesting.com>
> Sent: Sunday, August 03, 2003 9:47 PM
> Subject: [TenTec] OMNI 546 cabinet covering
>
>
> > Don,
> >
> > Other sources for covering would be to try a good hardware or arts &
> crafts
> > store (Hobby Lobby.)
> >
> > In addition to Glenn's comments, I'd suggest that after getting the old
> case
> > cleaned well, break the surface very lightly with steel wool or a
> > 'ScotchBrite' abrasive pad, to give a decent tooth for the adhesive.
> >
> > 73'
> > Tom N5OZQ
> >
> > ----------------------------
To: <tentec@contesting.com>
> > Date: Sun, 3 Aug 2003 16:07:50 -0700 (PDT)
> > From: Don Rasmussen <wb8yqj@yahoo.com>
> > To: tentec@contesting.com
> > Subject: [TenTec] OMNI 546 cabinet covering
> > Message: 11
> >
> > Hi Guys,
> >
> > Does anyone know if the faux leather contact paper
> > covering can be found anywhere. I suppose the aluminum
> > could be painted easlily enough but it seems to me
> > there would still be a source for this (black)
> > covering material.
> >
> > BTW - as the recent posts indicate, there is a new
> > OMNI C at this QTH and it is just a fabulous rig with
> > lots of character and charm. It's much like the
> > Corsair II, it's a rig you really enjoy having in
> > front of you.
> >
> > TenTec was quietly manufacturing these unique radios
> > during a time that I was fully committed to Kenwood
> > then Icom. Now that amateur radio has changed and I
> > find myself focused on CW, it sure is great to "find"
> > these great rigs and at an absolute bargain to boot!
> >
> > Thanks es 73,
> > Don Rasmussen WB8YQJ/6
> > Carlsbad, Ca.
> > __________________________________
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|