Don
When you get this figured out and you determine a source for the black
covering and a process to take off the old and put on the new I know there
will be many interested in what you did and where you got it. I know I
would.
Steve NU0P
----- Original Message -----
From: "Tom North" <tomnorth@airmail.net>
To: <tentec@contesting.com>
Sent: Sunday, August 03, 2003 9:47 PM
Subject: [TenTec] OMNI 546 cabinet covering
> Don,
>
> Other sources for covering would be to try a good hardware or arts &
crafts
> store (Hobby Lobby.)
>
> In addition to Glenn's comments, I'd suggest that after getting the old
case
> cleaned well, break the surface very lightly with steel wool or a
> 'ScotchBrite' abrasive pad, to give a decent tooth for the adhesive.
>
> 73'
> Tom N5OZQ
>
> ----------------------------
To: <tentec@contesting.com>
> Date: Sun, 3 Aug 2003 16:07:50 -0700 (PDT)
> From: Don Rasmussen <wb8yqj@yahoo.com>
> To: tentec@contesting.com
> Subject: [TenTec] OMNI 546 cabinet covering
> Message: 11
>
> Hi Guys,
>
> Does anyone know if the faux leather contact paper
> covering can be found anywhere. I suppose the aluminum
> could be painted easlily enough but it seems to me
> there would still be a source for this (black)
> covering material.
>
> BTW - as the recent posts indicate, there is a new
> OMNI C at this QTH and it is just a fabulous rig with
> lots of character and charm. It's much like the
> Corsair II, it's a rig you really enjoy having in
> front of you.
>
> TenTec was quietly manufacturing these unique radios
> during a time that I was fully committed to Kenwood
> then Icom. Now that amateur radio has changed and I
> find myself focused on CW, it sure is great to "find"
> these great rigs and at an absolute bargain to boot!
>
> Thanks es 73,
> Don Rasmussen WB8YQJ/6
> Carlsbad, Ca.
> __________________________________
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|