Jim,
When you adjusted the audio controls of the soundcard, did you adjust the
levels when it is in recording mode or playback mode? Common mistake that
people miss. Go to the audio mixer in windows, then to options, then to
properties, then check "recording" then adjust. Hope that does it.
Duffy
www.wb8nut.com
-------Original Message-------
From: tentec@contesting.com
To: <tentec@contesting.com>
Date: Wednesday, July 30, 2003 8:52:33 PM
To: tentec@contesting.com
Subject: Re: Works with Orion....Re: [TenTec] MixW and use with Orion
andArgonautV
Jim - N8LUV - here in Michigan, (Argonaut-V)
Yes, N4PY's suggestion does work. MixW is now handeling the freq. as well
as mode in fine business on my Argonaut-V. --- However, I still have not
got the Aux Jack - #1 with the optional cable to work with the Dell
computer's soundcard. The computer is hearing nothing! --- Sure would be
nice to get all of this to fly! --- Wow, all modes, a log, and rig
control all in one program - great if I can get it all to fly. I am
closer now then I was a few days ago.
Jim --- N8LUV
On Wed, 30 Jul 2003 20:13:35 -0400 (Eastern Standard Time) "J. D."
<duffyb01@fuse.net> writes:
> When I got home I set the baud rate in MixW to 1200 as N4PY suggested
> and it
> worked! I have the RTS and DTR to "always on" you may try that and
> see if
> the changes go both ways.
>
> Regards,
>
> Duffy
> www.wb8nut.com
>
> -------Original Message-------
>
> From: tentec@contesting.com
To: <tentec@contesting.com>
> Date: Wednesday, July 30, 2003 7:49:02 PM
> To: tentec@contesting.com
> Subject: Works with Orion....Re: [TenTec] MixW and use with Orion
> and
> ArgonautV
>
> Hi Duffy,
>
> Well, I just set up Mix to control my Orion as you suggested (used
> 57k6
> bps, RTS always on, DTR PTT+CW but will also try PTT via CAT) and I
> can
> command the Orion! It appears to be one way, i.e. MixW32 does not
> catch
> when I change the frequency with the main dial or aux dial so
> perhaps Mix
> is not polling the Orion. But the wheel mouse does work so I will
> just
> leave the dials alone.
>
> Now to test being able to transmitt! After rewriting my macros to
> remove
> the FT-1000MP Mk V commands and see if Orion commands work!!!
>
> Thanks for the info.
>
> 73, Tom N4ZPT
>
>
> On Wed, 30 Jul 2003 10:41:20 -0400, <duffyb01@fuse.net> wrote:
>
> > I sent Nick an email about enhancing MixW to control the Orion and
> the
> > Argonaut V. I also sent him files related to the PC control of the
> Orion
> > and the Argo. This is what Nick said:
> >
> >>>> Hello Duffy,
> > Please try "Jupiter (enhanced PC control) with
> > Argonaut - V and ORION
> > The documentation says that Jupiter, ORION and Argonaut have same
>
> > commands
> > for frequency and mode control.
> > Please let me know the result.<<<
> >
> > O.K., so I tried it as suggested with the Argonaut V and simply
> cannot
> > get it to work. I have used the same settings that I use with my
> Jupiter
> > and MixW is simply unable to control the Argo. Can anyone else give
> this
> > a shot? Does anyone else have any suggestions as to why it is not
>
> > working? The N4PY software works perfect with the Argo, but cannot
> get
> > the same result with MixW.
> >
> > Anyone up to the challenge?
> >
> > Regards,
> >
> > Duffy
> > www.wb8nut.com
> >
> >
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
>
>
> --
> Tom Azlin, N4ZPT
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> .
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
.
|