I have run my Jupiter on PSK-31 without any type interface, using VOX.
However, it's been awhile and I can't recall my VOX settings.
73, Winston K4CWQ
----- Original Message -----
From: "Bill Fulling" <w4njf@midflorida.com>
To: <tentec@contesting.com>
Sent: Saturday, April 05, 2003 19:39 PM
Subject: Re: [TenTec] Jupiter & PSK31
> Hell oKen,
> I run my Jupiter on PSK-31 w/o any interface except a "rat shack" 1:1
> isolation xfmr in the xmit audio line.The sound card settings can be very
> touchy,and I highly recommend that you use a Heathkit monitor scope (eg
> HO-10 or SB-610) set them up.Using VOX is a real pain in the butt,but my
> program (WinPSKse) does not allow direct PTT keying-while in Peg emulation
> mode.If you use the Jupe as a straight Jupiter,direct PTT keying is
possible
> if you use the hombrew interface shown on pg 2-6 of theARRL's HF Digital
> handbook. Try it and see-the parts cost about $5.00 at the Shack.
> 73 de Bill W4NJF
>
> Bill Fulling
> w4njf@email.midflorida.com
> ----- Original Message -----
> From: "Ken Kirkley" <no4d@charter.net>
> To: <TenTec@contesting.com>
> Sent: Saturday, April 05, 2003 5:11 PM
> Subject: [TenTec] Jupiter & PSK31
>
>
> Anyone out there running their Jupiter on PSK31 without the use of a TNC
or
> Rigblaster? Is it possible to run it on VOX as we do the Argonaut V? If
so,
> what are your VOX settings?
>
> 73 & God Bless,
> Ken/NO4D
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|