Duane,
I am using the factory stereo cable. I assume it is stereo all the way
through.
Rich
----- Original Message -----
From: "Duane Grotophorst" <n9dg@yahoo.com>
To: "Rich McCabe" <rich@1967z28.com>; <TenTec@contesting.com>
Sent: Thursday, May 30, 2002 9:59 PM
Subject: Re: [TenTec] Pegasus line out
> Rich,
>
> Are you using a mono wired cable or a stereo wired
> cable from the Pegasus to the sound card? I have run
> into some sound cards that don't work well at all if
> the L&R line-in leads are tied together. If you use a
> standard stereo wired jumper cable from the line out
> jack of the Pegasus to the sound card there will be
> 200 ohms (according to the Pegasus schematic I have)
> between the L&R inputs of the sound card, that maybe
> enough to avoid the problem I have ocassionally seen
> with L&R leads tied together with some sound cards.
>
> Duane
> N9DG
>
> --- Rich McCabe <rich@1967z28.com> wrote:
> > Thanks for all the responses.
> >
> > I think I am going to lose the sound card in the
> > circuit first of all..
> >
> > I am curious why Ten Tec uses a stereo phono plug?
> > If I pull the plug half
> > way out, I get about 20% more audio. But also pick
> > up RF...
> >
> > Almost like the Pegasus amp is straining to drive
> > the speakers.
> >
> > Rich
> >
>
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! - Official partner of 2002 FIFA World Cup
> http://fifaworldcup.yahoo.com
>
>
|