Hi Paul,
I use my Jupiter all the time on QRP SSB. I run with the power
control set to 0%. This gives a CW reading of 4W on an external
power meter and 7 watts on the Jupiter meter. With modulation to
get the ALC LED to wink I get 4W PEP using a monitor scope and 7W
PEP on the internal meter.
I also plan to use mine on FD on 40M SSB but won't be QRP.
73
Jim K4CGY
--- Paul DeWitte K9OT <k9ot@mhtc.net> wrote:
>
> Transmitting into a
> dummy load on SSB using the same setting as on CW it will light
> the alc but
> very little meter movement on the power meter. This is an
> average reading
> meter not a PEP. The scale is 0-30 watts so it should show
> something with 5
> watts. Has anybody tried QRP with the Jupiter on SSB and if so
> what setting
> on the output have you used? Thanks 73 Paul K9OT
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
__________________________________________________
Do You Yahoo!?
Yahoo! - Official partner of 2002 FIFA World Cup
http://fifaworldcup.yahoo.com
|