36"W X 12"H X 17D
Steve
N4LQ
If two wrongs don't make a right, try three.
----- Original Message -----
From: "Bill Steffey" <ny9h@arrl.net>
To: "Ten-Tec Inc. Amateur Radio Sales" <sales@tentec.com>;
<tentec@contesting.com>
Sent: Saturday, March 16, 2002 5:35 PM
Subject: Re: [TenTec] Orion commentary
Did anybody get the dimensions of the Orion ????
H x W x D ?????
Or could/ would Scott part with this info ???
Thanks
bill ny9h
At 04:21 PM 3/12/02, Ten-Tec Inc. Amateur Radio Sales wrote:
>Wow, what a weekend. The Orion certainly got a terrific reception at
>Charlotte.
>After working the hamfest all day Sunday we drove back over to Tennessee
and
>I spent quite a while into the night reading the commentary on the
>Internet at home
>Sunday and all day Monday here at the factory.
>
>I haven't addressed any feature or spec questions that have been brought up
in
>Internet commentary only because the only information we have out is
publicly
>posted to our web site and anything else is just speculation. There have
been
>some comments along the lines of "why didn't it do . . . . " or "will
>it.." when
>the radio possibly already does, or will. More information and tech
>specs will
>be coming over the next couple of months.
>
>I wanted to clear up a few things about Orion that I have read on the 'net
>already:
>
>(paraphrasing):
> >Gold trim. It has gold trim. Gold trim, good. Gold trim, bleech.
>
>I read the comments on the Orion trim color with quite a bit of surprise,
and
>kept waiting for the message that said "Huh? I was at Charlotte. There's
no
>gold trim on that radio!"
>
>There is no gold trim on the Orion. I don't know how this got started, but
I
>repeat: there is NO gold trim. If you saw a picture with gold trim, it
>must have
>just been weird lighting in the building. The trim on the Orion is
>chrome-nickel.
>It is shiny. It is also very SILVER in color. Not
>gold. Silver. "Mirror" finish.
>No gold trim. It is the same knob color that is in use on the RX-350
>receiver.
>The ORION nameplate on the front under the meter is also chrome-nickel
>in color. The reason we elected to use these knobs is the uniformly
positive
>commentary we had about them vis a vis the RX-350 receiver.
>
>(paraphrasing):
> >Display this, display that. Color. Monochrome. Blue. Grey. Etc.
>
>I posted a message to the reflector before we even left for Charlotte
stating
>that the display for the Orion was not done. Neither the physical screen
in
>use for the radio, nor anything that appears on it is final. That goes
>for the
>spectrum scope, freq display, literally everything. We have more screens
to
>test yet. We'll be putting in a lot of time on the layout/design aspect
>of what's
>on the screen in the coming weeks. I'd say, don't read anything into any
>of the
>comments - positive or negative - about the Orion screen and what is shown
>on it. It's going to change.
>
>(paraphrasing):
> >The tuning knob feel was exactly like that on a boombox - no weight,
> >impossible to "spin"
>
>Both of the tuning knobs are weighted and are identical (except for the
>chrome-nickel trim ring) to those used on the Omni-VI Plus. Just like the
>Omni's, you cannot grab our knobs and spin them down the band until they
>come to a stop. This is a combination of the adjustable drag feature on
the
>knob and mechanical resistance within the tuning encoders themselves.
>Like the Omni's, you will have to place your hand on the tuning knob and
turn
>it to move up and down the band rather than just free spinning it.
>
>K8VT wrote:
> >I'm probably wrong, but I think many of us believed (or hoped) that at
> >least part of the >reason for this "pre-introduction" release was done
>exactly TO generate comments and >feedback before everything gets
> >chiseled in stone.
>
>No, you're absolutely right. We wanted feedback on the direction of the
>radio.
>See my comments at the bottom.
>
>(paraphrasing):
> >The AF knob is not on the bottom row of controls.
>
>This is incorrect. Both the MAIN AF and SUB AF knobs are on the bottom
>row of knobs, directly above the large tuning knob closest to the screen.
>
>(paraphrasing):
> >Ten-Tec didn't put a PS/2 keyboard connector on the Orion like on the
> Jupiter
>
>True. We never used the connector on the Jupiter. We had anticipated
>keyboard control of the Jupiter, but unfortunately another company has a
>patent
>on connecting a keyboard to a radio transceiver and we were never able to
come
>to an agreement to license it. This apparently won't be resolved, and we
>left the
>PS/2 connector off of the Orion. The PS/2 on the Jupiter has no function.
>
>(paraphrasing):
> >Ten-Tec better get it in gear if they're going to sell the Orion at
Dayton.
>
>We're not. We've said all along there is no anticipated delivery date for
>Orion
>and that's still the case. It will be available later in 2002. There is
>a colossal
>amount of programming to be done yet.
>
>(paraphrasing):
> >Are the Jupiter and Pegasus discontinued?
>
>Not a chance!
>
>I find it very interesting that much of the discussion of the radio has
>centered
>solely on cosmetics, as the Japanese manufacturers have done an excellent
job
>of selling various pieces equipment for many years that are cosmetically
sharp
>but performance wise may not have met up to what Ten-Tec was currently
>offering at the time. We've taken the opposite route for a very long time
>- performance and ergonomics first, 'look' second. Maybe even third or
>fourth.
>Unfortunately, it has not served us well and we must change to respond to
the
>demands of the marketplace. Performance is extremely important, but there
is
>also a very sizable proportion of the amateur population that is interested
in
>whether the radio looks appealing to them and the performance can be
secondary
>as long as it's within the same realm of other comparable rigs. Ten-Tec
>MUST respond to that sentiment because we MUST have those hams as
>customers if Orion is going to be a success for us. Presently, we don't!
>
>Some of this sentiment has even been expressed by some of the Ten-Tec
>'faithful' here on the reflector, in reverse. Comments like "I'm not going
to
>buy a Ten-Tec radio that looks like ...XYZ" of course, I'm disappointed by
>that. And my reaction is to say, I'm sorry we can't come up with anything
>performance-wise that's going to overcome the way you feel - but that just
>proves my point above, that cosmetics are a serious issue and performance
>often will take a back seat no matter how good the radio will operate!
>
>We WILL have super high end performance and features that are superior to
>the JA radios and cosmetics comparable to the fit and finish with the
Orion.
>Ten-Tec can't be 'as good' we have to be BETTER. There are some of you
>reading this that are going to vehemently disagree with me on these points
>(and already have) - and I understand.
>
>The commentary from the Charlotte hamfest and the initial reaction over the
>Internet this weekend has convinced me that for performance and cosmetics
>that we are very much on the right track with the Orion to be a big winner
>for the hobby.
>
>Thanks again,
>
>Scott Robbins, W4PA
>Amateur Radio Product Manager
>
>
>
>-----------------------------------------------------------------
>Ten-Tec, Inc., 1185 Dolly Parton Pkwy, Sevierville, TN 37862 USA
> Contact Mon-Fri Eastern: Office/Tech (865) 453-7172 9 am-5 pm.
> Repair (865) 428-0364 8-4. Sales (800) 833-7373 9 am-5:30 pm.
> Fax (865) 428-4483 24 hrs. Visit us at <http://www.tentec.com>
>
> --->--->---> Please note: E-mail <sales@tentec.com> for sales
> and general product info only. We presently do not offer
> repair, parts, or kit building tech support by electronic mail,
> please telephone (865) 428-0364 or (865) 453-7172.
>
> Ten-Tec manufactures amateur radio equipment, military and com-
> mercial use HF radio equipment, custom aluminum and steel
> enclosures and has an on-premises, fully equipped tool and die
> facility supplying metal and plastic injection mold industries.
> Potential tool and die, custom enclosure or communications
> electronics customer? Contact us with your needs.
>
>
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|