TenTec
[Top] [All Lists]

Re: [TenTec] My Jupiter/Heil Questions.

To: WmLB@prefer.net
Subject: Re: [TenTec] My Jupiter/Heil Questions.
From: "Bill Taylor(W4WBT)" <w4wbt@fmci.net>
Date: Thu, 27 Sep 2001 07:45:53 -0400
List-post: <mailto:tentec@contesting.com>
I have used the Heil gold classic mike and the h5 headset with the jupiter for almost a year with plenty of gain. Unless tentec has changed something in the radio, I have had no problems. My Mic gain is at less than 50%. Why the problem?
BT


First .. I thanks to the many of you for your
comments. This really is a great reflector. It
became clear early on, that I am not alone in my
frustrations with the Ten Tec/Heil combo.

I don't blame Heil and I don't blame TenTec.
Clearly not all mics and all rigs can be expected
to work well together. It's not a perfect world!

Based on the recommendations of another, I had an
extended telephone conversation this afternoon with
Julius, W2IHY, regarding one of his dual band audio
equalizers/noise gates. It would be a somewhat
pricy alternative ($130), but it would provide more
then adequate input to the Jupiter and also provide
some audio "tailoring" tools. As I just told
someone else, I have never been one of the guys
that spend a lot of time tinkering with the "highs
and the lows".. but it might be interesting to play
with. (It's a hobby .. right?)

So.. is if there anyone out there now using the
Heil/W2IHY Equalizer/TenTec combo...? I would be
interested in your comments.

I have been heading down the path of selling my
Heil and replacing it with a 705. That is clearly
the least expensive option.. just not sure it is
the right one. Maybe it is... since I am not a
"audio" guy.. beyond what is considered acceptable
quality

Hopefully I am not taking up too much band width
for this issue..My apologies if that might be the
case.

Bill, W6WLB





_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec


<Prev in Thread] Current Thread [Next in Thread>