[TenTec] CORSAIR I (tick,tick,tick...)

[N4NT@wireco.net (Michael O. Hyder)]

Had a problem with an electric fence.  When brush grows up against the
fence, the fence charger goes into a "Weed Burning" mode and tries to zap
the brush.  The farmer and I walked the perimeter of the fence and found
several places where the brush was on the fence.  I told him that it could
lessen the effectiveness of his fence and that his horses might get out.
Within an hour he was out with a bushhog and made quick work of the brush
... and my QRN.

Luck de Mike N4NT@wireco.net

----- Original Message -----
From: <ARDUJENSKI@aol.com>
To: <TenTec@contesting.com>
Sent: Tuesday, February 01, 2000 10:35 AM
Subject: [TenTec] CORSAIR I (tick,tick,tick...)


>
> I was wondering if someone might be able to point out the possible cause
> (source) of the low level ticking I hear in the background on my CORSAIR
I.
> It is more noticeable on the lower HF bands (not detectable on 12 and
10M).
> It sounds like the WWV time clicking (about 1 second spacing)and can be as
> much as 1 S-unit. It is not generally noticeable when a signal is present.
> Thank you.   Alan KB7MBI



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm