No adjustment is available. Mine runs only 2600V, no load, for Ep, but
still puts out rated power. It was higher, but at one point the bias
supply transistor blew out and it has never been as high since I did the
replacement.
73, Duane
Duane A. Calvin, AC5AA
Austin, Texas
ac5aa@juno.com -or- ac5aa@earthlink.net
Day: dacalvin@us.ibm.com
--------- Forwarded message ----------
From: nw4p@mary.xtn.net
To: Tentec@contesting.com
To: <tentec@contesting.com>
Date: Wed, 1 Dec 1999 22:03:17 -0500
Subject: [TenTec] Plate Voltage
Message-ID: <199912020303.WAA04531@secure.xtn.net>
Hello Everyone,
I have a Centurion and the plate voltage is about 2900 volts. Specs
are 3100. Is this a factory adjust or is that adjustment easily made
by a novice like myself? If so, how !
Too, I got to hear 2 Pegasus' on the SSB net Sunday, both were S7-S9,
(heard Pegs before but weak signals) and the audio was super. The clarity
was superb, beautiful reproduction of what sounded to be normal voices.
No doubt, there is a lot of potential for "filling the envelope" but as
is, TT has a winner, at least in the audio department.
73 and Thanks
Richard NW4P
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|