Bob,
If you want a multi-protocol program written to work with the KAM, try
XPWare. He has a free demo that will run for 100 times before it times
out and you have to pay for it. It will use the dual-port capabilities
of the KAM also. I didn't bookmark the site, but if you search on
XPWare you'll find it. If you want logging software that will use the
KAM, DX4WIN works well (but does not support dual-port operation). For a
freebie terminal program, chick out Hilgreave's HyperTerminal which is
free for download over the web. It works fine for a standard terminal
program.
73, Duane AC5AA
On Fri, 12 Nov 1999 20:11:24 -0500 Robert Weingaertner
<weingaertner@nac.net> writes:
>
> Hi gang,
>
> I run a Kantronics KAM (the original with some upgrades) with my
> Paragon I for the digital modes. I've run it with an old PC
> portable (4.9 MHz 8088). Alright laugh, but running YAPP as
> a terminal its adequate.
>
> I also have an IBM Aptiva running Windows 95. Its time to switch
> the KAM over to the new PC. Can anyone recommend a decent terminal
> program that will run in Windows? I tried a couple from the QRZ
> CD ROM but I either can't unzip them or they don't work properly.
>
> OR, should I forget about RTTY, AMTOR and PACTOR and just run CW?
>
> Thanks!
>
> Bob WB2VUF
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
Duane A. Calvin, AC5AA
Austin, Texas
ac5aa@juno.com -or- ac5aa@earthlink.net
Day: dacalvin@us.ibm.com
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|