I was keying the rig with a paddle, using the built in keyer.
I was running under Windows 3.1 which i don't recommend to anyone. Tentec
says it will work and it does, but just barely. I am moving up to Windows
95 tomorrow so I will check to see if DOS programs still cause the same
problem. Actually all you have to do is go to the DOS prompt without even
running anything to have the problem.
I don't know if the Pegasus program is 16 or 32, the programming manual
says it is a Windows based Graphical Users Interface program.
73, Dave, VE1ADH
On Wed, 3 Nov 1999, Steve Baron - KB3MM wrote:
> How were you keying the rig ?
> Running under WIN 95 ?
> Is the Pegasus program 16 o 32 bit ?
>
> ----- Original Message -----
> From: David McClafferty <at060@chebucto.ns.ca>
> To: Steve Baron - KB3MM <SteveBaron@starlinx.com>
> Cc: Tentec Users Reflector <tentec@contesting.com>
> Sent: November 03, 1999 2:03 PM
> Subject: Re: [TenTec] Thanks for Pegasus info
>
>
> > I guess it needs the radio attached to generate a new .INI file. I should
> > have known that because I have played around with editing the .INI file
> > with a text editor to change the status of the radio from other programs.
> > BTW if you are running DOS programs when transmitting you will get nasty
> > interrupts. It really bad on CW - chops up both dits and dahs, my keying
> > is bad enough without that Hi.
> > 73, Dave, VE1ADH
> >
> >
> > On Tue, 2 Nov 1999, Steve Baron - KB3MM wrote:
> >
> > >
> > > AHA! That is very important.
> > >
> > > The offset is incorrect in the INI file. If that is true, then the
> > > correct/incorrect clock time has nothing to do with being connected to
> the
> > > radio!
> > >
> > >
> > > ----- Original Message -----
> > > From: Tim Cook <timcook@erinet.com>
> > > To: Steve Baron - KB3MM <SteveBaron@starlinx.com>
> > > Sent: November 02, 1999 5:55 PM
> > > Subject: Re: [TenTec] Thanks for Pegasus info
> > >
> > >
> > > > I changed the UTC_HOUR_CORRECTION= 9 to =5
> > > > Tim
> > > > ----- Original Message -----
> > > > From: Steve Baron - KB3MM <SteveBaron@starlinx.com>
> > > > To: Tim Cook <timcook@erinet.com>
> > > > Sent: Tuesday, November 02, 1999 12:19 PM
> > > > Subject: Re: [TenTec] Thanks for Pegasus info
> > > >
> > > >
> > > > > AHA ! So there is a permanent fix.
> > > > >
> > > > > What did you change in the INI file ?
> > > > > ----- Original Message -----
> > > > > From: Tim Cook <timcook@erinet.com>
> > > > > To: Steve Baron - KB3MM <SteveBaron@starlinx.com>
> > > > > Sent: November 02, 1999 5:14 PM
> > > > > Subject: Re: [TenTec] Thanks for Pegasus info
> > > > >
> > > > >
> > > > > > That's a good question, no I don't think there is a clock in the
> radio
> > > > > > itself, but here is the response I got from Ten Tec
> > > > > >
> > > > > > "The UTC time offset function doesn't work without the radio
> > > > > > attached! That's why you can't get it to read correctly..."
> > > > > >
> > > > > > I did go in and change the pegasus.ini file and it now works as it
> > > > should
> > > > > > without the radio attached....
> > > > > >
> > > > > > 73
> > > > > > Tim
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: Steve Baron - KB3MM <SteveBaron@starlinx.com>
> > > > > > To: Tim Cook <timcook@erinet.com>; tentec <tentec@contesting.com>
> > > > > > Sent: Tuesday, November 02, 1999 12:11 PM
> > > > > > Subject: Re: [TenTec] Thanks for Pegasus info
> > > > > >
> > > > > >
> > > > > > > That's interesting.
> > > > > > >
> > > > > > > Why would the time be correct only when connected to the radio ?
> > > > > > > Is there a clock in the radio ?
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: Tim Cook <timcook@erinet.com>
> > > > > > > To: tentec <tentec@contesting.com>
> > > > > > > Sent: November 02, 1999 4:52 PM
> > > > > > > Subject: [TenTec] Thanks for Pegasus info
> > > > > > >
> > > > > > >
> > > > > > > >
> > > > > > > > Thanks to all (including Ten Tec) for the answer to my
> question
> > > > about
> > > > > > the
> > > > > > > > UTC time on the Pegasus. It seems it will work just fine when
> the
> > > > > radio
> > > > > > is
> > > > > > > > connected. thanks again for answering my question, certainly
> not
> > > > going
> > > > > > to
> > > > > > > be
> > > > > > > > the last !! :)
> > > > > > > >
> > > > > > > > 73
> > > > > > > > Tim
> > > > > > > > NZ8J
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > FAQ on WWW:
> http://www.contesting.com/tentecfaq.htm
> > > > > > > > Submissions: tentec@contesting.com
> > > > > > > > Administrative requests: tentec-REQUEST@contesting.com
> > > > > > > > Problems: owner-tentec@contesting.com
> > > > > > > > Search:
> > > http://www.contesting.com/km9p/search.htm
> > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > > --
> > > FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> > > Submissions: tentec@contesting.com
> > > Administrative requests: tentec-REQUEST@contesting.com
> > > Problems: owner-tentec@contesting.com
> > > Search: http://www.contesting.com/km9p/search.htm
> > >
> >
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|