I had to do the same thing for CW....but took it a step further...the COM
output from the computer goes to a switch box...the box contains an SSTV
converter...DB-25 to a TNC and a keyed reed relay for CW
(I use CT for contesting)...and switches all the audio leads!!!
Now, I'll trade a DB-25 pin for CW for a DB-25 pin to the REV button..This
way I could mount a momentary switch on the remote VFO....wouldn't that be
dandy for split freq. DX'ing!!
But I think the DB-25 on the OMNI is filled up with band control stuff...
Hmmmm I've got this big, surplus, motor controlled RF switch..could be just
the thing for switching antennas..
that just leaves the AMP...
73, Jim WB2TPS
>>I made up a "Y" cable..one leg to the computer, the other to the
>tuning knob
>>and the base to the OMNI.
>
>I did that, too. I also had to Y another cable for the CW output
>from the computer to the radio. Any earthly idea why Ten-Tec
>didn't wire up the DB25 for CW input, too?
>
>73,
>dale, kg5u
>
>
>
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|