TenTec
[Top] [All Lists]

[TenTec] TenTec for 160M

To: <tentec@contesting.com>
Subject: [TenTec] TenTec for 160M
From: rrossi@btv.ibm.com (Ronald D Rossi)
Date: Wed, 06 May 1998 15:35:00 -0400
>>>Clark Savage Turner WA3JPG said:
> I can only tell you which one to avoid.  Do NOT buy the old
> OMNI-A or OMNI-D (series B or C) as they have very low 
> sensitivity on 160, by design.  It does not seem like that
> would be a problem on 160, but I found it to be so, even
> with very good antennas for top band.  The Corsair I and
> II were much better, the OMNI V and VI are great.

FWIW:

Empirically only a problem if you have a descent antenna on 160m. I find that 
there are many more stations I can hear than I can work. I have tried a short 
top loaded vertical w/ 6 radial (pretty poor) and an 80m dipole matched for 
160 fed with 450 Ohm line (even worse).

TT Omni-D Series B

> 
> Clark
> WA3JPG
> 
> --
> FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 owner-tentec@contesting.com
> Search:                   http://www.contesting.com/km9p/search.htm
> 








--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>