[TRLog] PCMCIA card driver for TRLog Network

[bernie@internext.co.za (Bernie van der Walt)]

Feedback for those interested:

I have since found Cardware 2.0 which 
appears to be freeware and it works  fine
at first glance.  CW 2.0 puts the PCMCIA
serial card on COM3 instead of COM2
but that is not a problem as far as I can
see.

Thanks for all the suggestions.

Bernie, ZS4TX

> I am looking for a PCMCIA Serial card DOS "Enabler" 
> program which will function with an Eiger Labs 
> PCMCIA Serial Card EPX-SC1000/SC2000.