Hi
I am looking for a PCMCIA Serial card DOS "Enabler"
program which will function with an Eiger Labs
PCMCIA Serial Card EPX-SC1000/SC2000.
The driver included with the card is only for
Windows.
I have an evaluation copy of Cardware 6.0 which
works but the SW costs more than the card and
has many other functions not required at all.
Other "enablers" I could find was freeware
but only for fax or modem cards and did
not work on the serial PCMCIA card. They
are small ~30K files and I am sure somewhere
one for a Serial card should exist as well.
The purpose of the PCMCIA card is to add
another COM port to a Laptop to be able to
control a radio as well as connect to a TRlog
network.
Thank you
Bernie, ZS4TX
|