> 1). I understand that Relay Control and Paddle Input cannot share an LPT =
> because both need pin 14. Is it also true that Footswitch Input and =
> Paddle Input cannot share an LPT because both need pullup resistors to =
> pin 14?
Correct - although, you may find you don't need the pullup resistors
or you can get the voltage for them from something else.
> 2). Coming from my footswitch, I understand to connect the hot to pin =
> 15...which pin do I connect the shield/ground to, is it 18, 25, or =
> another pin? If it is 25, will the Footswitch Input then interfere with =
> LPT1's outgoing band data that uses pin 25?
Any ground will do. Pin 25 is just a ground.
> 3). Likewise, for the Relay Control Output, I understand that the hot is =
> pin 15...which pin do I connect the shield/ground to, is it 18, 25, or =
> another pin? If it is 25, will the Relay Control output then interfere =
> with LPT2's outgoing band data that uses 25?
Same.
Tree
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|