Hi all,
there is a parameter that can be adjusted,
for radio one and radio two, but per "1" seconds step!!
Since the default is 1 second already, you
can only make this time longer!!
These are:
RADIO ONE UPDATE SECONDS
RADIO TWO UPDATE SECONDS
If this has no other drawbacks or negative side effects
we could ask Tree to make that one in milliseconds or
something shorter than 1 second, to give
a faster frequency readout.
73
Bob,I2WIJ - J49WI - (J45W next July)
mailto:i2wij@qsl.net
http://www.qsl.net/i2wij/
-----Original Message-----
From: Igor Sokolov [mailto:ua9cdc@dialup.mplik.ru]
Sent: Monday, June 26, 2000 10:08 AM
To: 00tlzivney@bsuvc.bsu.edu; trlog@contesting.com
Subject: Re: [TRLog] Radio Update Seconds
What are the radios that you use? There are ajustable delays build into the
program for different radio. I for one use Icom and the Icom Command Pause
and Icom Responce Timeout sums up to nearly 1 sec. You can try and shorten
these parameters.
73,
Igor, UA9CDC
----- Èñõîäíîå ñîîáùåíèå -----
Îò: <00tlzivney@bsuvc.bsu.edu>
Êîìó: <trlog@contesting.com>
Îòïðàâëåíî: 26 èþíÿ 2000 ã. 07:27
Òåìà: [TRLog] Radio Update Seconds
>
> OK, I guess you win. CT seems totally unable to realiably do all the
> 2 radio stuff and NA on my 486-66 operates at glacial speed.
>
> I downloaded the demo of TR today, and it seems to do all I need:
> read each radio's frequency and control both of the TopTen relay boxes.
> However, after getting used to CTs superb frequency readout from
> my OMNI VI+s I have become accustomed to reading the frequency from
> the PC Monitor, not the rig. In TR, the update is apparently only
> once per second so that I find it annoying while tuning up and down the
> band. Furthermore, at this time I only have one serial cable (still
> in the testing mode). So, when I use ALT-R to switch radios, I find
> that the frequency disappears (no radio to read the frequency from) and
> there appears to be a one second delay on switching back to the first
> radio before a frequency shows up.
>
> Question:
>
> I am concerned that during heavy use of ALT-R (perhaps in a two radio
> S&P mode), the frequency and the Radio 1/Radio 2 box will get out of
> sync. Is this what will happen? Is there any way to provide faster
> frequency update, such as CT has?
>
> Terry Zivney, N4TZ/9
>
> --
> FAQ on WWW: http://www.contesting.com/FAQ/trlog
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|