Soro,
6.38 does the same thing for me. Had to get rid of the speedup and
slowdown characters in my messges to stop the increase. Maybe someone
has a solution. I'd certainly hope so.
73,
Don, W6OA
Soro Roberto wrote:
> Did you hit Alt-Q before?
> It has always worked OK with me, no doubt.
>
> The only strange thing I noticed is
> if you have some Ctrl characters to increase
> the speed and the correspondent ones to reduce
> to the initial value
> (for instance to send TEST faster)
> and if you let the CQ go, run after run
> the CW speed is slightly increased
> and after a couple of minute,
> if you had an initial speed say 32
> your transmit speed becomes higher
> abt 40/42 and continuosly increasing.
> If you hit ESC to stop and then Alt-C
> again the CQ start with the last reached speed.
> If you hit F1 this reset the speed value
> to the initial one and the next Alt-C
> will start from 32 (and still will
> increase at each run).
> Anybody notice this before??
> Bob,I2WIJ - J49WI
>
> mailto:i2wij@qsl.net
> http://www.qsl.net/i2wij/
>
> -----Original Message-----
> From: K5NZ@aol.com [mailto:K5NZ@aol.com]
> Sent: Saturday, August 14, 1999 2:29 PM
> To: trlog@contesting.com
> Subject: [TRLog] Alt C
>
> Ver. 6.42
>
> Anyone else see that Alt C (auto cq resume) is not working?
>
> mike k5nz
>
> --
> FAQ on WWW: http://www.contesting.com/trlogfaq.html
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
> --
> FAQ on WWW: http://www.contesting.com/trlogfaq.html
> Submissions: trlog@contesting.com
> Administrative requests: trlog-REQUEST@contesting.com
> Problems: owner-trlog@contesting.com
> Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|