Jeff,
In the Log window, the lower part has an adjustable "divider". Below this
divider, log info is
displayed with a light yellow background for all previous QSO's with the
station you are working or
the call you have entered into the call entry window. From this you can easily
determine what bands
a station is needed on.
Perhaps you've not expanded the log window enough vertically to notice this?
73, Ted W4NZ
(N1MM user for about 2 years now)
>-----Original Message-----
>From: secc-bounces at contesting.com [mailto:secc-bounces at contesting.com]On
>Behalf Of Macie, Gordon
>Sent: Monday, November 21, 2005 5:17 PM
>To: ku8e at bellsouth.net
>Cc: secc at contesting.com
>Subject: Re: [SECC] N1MM Software
>
>
>This is a SERIOUS Shortcoming... Thanks for the info. I subscribed to the
>digest version
>of the reflector today.. After I get up to speed I'll ask about this.
>
>Gordon
>
>
>The only complaint is that it has no way to check if you worked stations on
>another band
>when you are running. All it has is a check partial. The way the windows are
>layed out it
>is very similar to Writelog. (Maybe a poor man's Writelog ??)
>
>
>Jeff
>
>
>_______________________________________________
>SECC mailing list
>SECC at contesting.com
>http://lists.contesting.com/mailman/listinfo/secc
>_______________________________________________
>SECC mailing list
>SECC at contesting.com
>http://lists.contesting.com/mailman/listinfo/secc
|