[SD-User] S.D. Logger on a new P.c

To:	sd-user@contesting.com
Subject:	[SD-User] S.D. Logger on a new P.c
From:	Joe Ryan <joe.ei7gy@gmail.com>
Date:	Mon, 17 Feb 2025 08:40:06 +0000
List-post:	<mailto:sd-user@contesting.com>

 SD needs to run in "legacy console mode", as shown on page 3 of the SD
manual.  However, Windows 11 may not come with legacy console mode
installed.

If the "Use legacy console" flag on the Properties / Options screen [as per
page 3 of the SD manual] is greyed out, you can install legacy console mode
by going to Windows -> Settings -> System -> Optional features -> Legacy
Console Host -> Add

73, Joe EI7GY
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user

<Prev in Thread]	Current Thread	[Next in Thread>
[SD-User] S.D. Logger on a new P.c, Joe Ryan <=

Previous by Date:	[SD-User] S.D. Logger on a new P.c, Richard Langford
Next by Date:	Re: [SD-User] SD-User Digest, Vol 266, Issue 5, Richard Langford
Previous by Thread:	[SD-User] S.D. Logger on a new P.c, Richard Langford
Next by Thread:	Re: [SD-User] SD-User Digest, Vol 266, Issue 5, Richard Langford
Indexes:	[Date] [Thread] [Top] [All Lists]