To: | "G.W.Evans" <gw3wwn@onetel.net.uk>, sd-user@contesting.com |
---|---|
Subject: | Re: [SD-User] Com port keying line |
From: | Darren G0TSM <sd@g0tsm.com> |
Date: | Fri, 26 Mar 2004 09:03:52 +0000 |
List-post: | <mailto:sd-user@contesting.com> |
Looks like it's a known 'feature' on ME There is a fix for it.... http://support.microsoft.com/default.aspx?scid=kb;EN-US;q285894 Darren G0TSM At 10:19 19/03/2004, you wrote: Been using Win 98, no probs. Now on Me, the Com port (pins 4 and 5), is enabled at boot up, 8.4v appearing on the keying line, doesn't happen in safe mode, and didn't happen on Win98. Starting SD clears the line and all is well, and stays that way when SD is unloaded. But I have to disconnect the PC keying line to use the rig for general CW working. I know that this is not an SD problem, it's the PC, but I need the info from somewhere. Thanks. Wynne, GW3WWN gw3wwn@onetel.net.uk
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [SD-User] Set up for CQWW WPX, Paul Ormandy |
---|---|
Next by Date: | [SD-User] Problem with Commonwealth Contest log, Steve Ireland |
Previous by Thread: | Re: [SD-User] Com port keying line, Steve Harwood |
Next by Thread: | [SD-User] Yeovil Fun Run Contest, Dave Sergeant |
Indexes: | [Date] [Thread] [Top] [All Lists] |