To: | "G. W. Evans" <gw3wwn@onetel.net.uk> |
---|---|
Subject: | Re: [SD-User] Com port keying line |
From: | Steve Harwood <g4owt@btinternet.com> |
Date: | Fri, 26 Mar 2004 08:15:08 +0000 |
List-post: | <mailto:sd-user@contesting.com> |
In message <000001c40e68$b9e50c40$c3794ed5@mrevans>, G.W.Evans
<gw3wwn@onetel.net.uk> writes
Been using Win 98, no probs. Now on Me, the Com port (pins 4 and 5), is enabled at boot up, 8.4v appearing on the keying line, doesn't happen in safe mode, and didn't happen on Win98. Starting SD clears the line and all is well, and stays that way when SD is unloaded. But I have to disconnect the PC keying line to use the rig for general CW working. I know that this is not an SD problem, it's the PC, but I need the info from somewhere. Thanks. Wynne, GW3WWN gw3wwn@onetel.net.uk
Steve G4OWT -- Steve G4OWT email: g4owt@btinternet.com Homepage: http://www.g4owt.btinternet.co.uk Qsl Sub-Manager for G4A & G4H Series Calls _______________________________________________ SD-User mailing list SD-User@contesting.com http://lists.contesting.com/mailman/listinfo/sd-user |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | RE: [SD-User] Contest Setup ?, John Dunnington |
---|---|
Next by Date: | [SD-User] Set up for CQWW WPX, Paul Ormandy |
Previous by Thread: | [SD-User] Com port keying line, G.W.Evans |
Next by Thread: | Re: [SD-User] Com port keying line, Darren G0TSM |
Indexes: | [Date] [Thread] [Top] [All Lists] |