Many thanks to all who helped me find the problem, especially Larry K8UT and
Rich VE3KI. It just needed the latest version of WB, rather than my old
download. The only reference I could find online was a link to a very old
version which did not work with N1MM+.
John GW4SKA
-----Original Message-----
From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of Richard Ferch
Sent: 28 October 2017 02:00
To: rtty@contesting.com
Cc: john@bordertech.co.uk
Subject: Re: [RTTY] N1MM+ and Waterfall Bandmap
John,
In the Spectrum Window, select External > Waterfall Bandmap as the spectrum
source.
N1MM+ sends frequency data to WB, and WB sends spectrum data to the
N1MM+ N1MM+
Spectrum Window. The RSP1 is not seen by N1MM+ at all, it merely provides
the I/Q data that WB uses to generate its spectrum display.
73,
Rich VE3KI
GW4SKA wrote:
> How do I get the RSP1 to send an ident to N1MM, or otherwise get them
connected?
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
---
This email has been checked for viruses by AVG.
http://www.avg.com
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|