Take into account how 2Tone combines strings sent twice in succession to
produce when required an improved decode. It is better to program the macros
like this illustration from N1MMplus:
F2 Exch,{TX} {SENTRST} {EXCH} {EXCH} {TIME2} {TIME2} ! {RX}
Please never send DE and never when in S&P send "his call de your call" -
your call sent twice is better and shorter.
For those who want to know my full macro set see below.
The RUN F6 message is because with SO2R I can RUN on 2 bands and use this to
try and move a mult to another band.
73 David G3YYD aka M7T in contests
#RUN MESSAGES, Run Messages begin here
-----------------------------------------
F1 CQ,{CLEARRIT}(DELALL}{TX}{ENTER}cq BARTG {MYCALL} {MYCALL} {RX}
F2 Exch,{TX} {SENTRST} {EXCH} {EXCH} {TIME2} {TIME2} ! {RX}
F3 TU,{TX}{ENTER} ! TU {MYCALL} QRZ {RX}
F4 Mine,{TX} {MYCALL}{RX}
F5 His,{TX} ! {RX}
F6 QSY,{TX} PSE QSY to {OTHERFREQ}? {RX}
F7 QRZ,{TX} QRZ {MYCALL} {MYCALL} QRZ{RX}
F8 Agn?,{TX}agn? agn?{RX}
F9 2Exch,{TX} {EXCH} {EXCH} {TIME2} {TIME2} {RX}
F10 LOGPOP,{TX} TU{LOGTHENPOP} NOW{F5}{F2}{RX}
F11 WIPE,{WIPE}
F12 GRAB,{GRAB}
#S&P MESSAGES, Search and Pounce Messages begin here
---------------------------
F1 CQ,{TX}{CLEARRIT}{DELALL}CQ {mycall} {mycall} TEST{RX}
F2 Exch,{TX} {SENTRST} {EXCH} {EXCH} {TIME2} {TIME2} {MYCALL} {RX}
F3 TU,{TX}{ENTER} ! TU {MYCALL} {RX}
F4 Call,{TX} {MYCALL} {MYCALL} {MYCALL} {RX}
F5 His,{TX} ! {RX}
F6 {MYCALL},{TX} {MYCALL} {RX}
F7 QRZ,{TX} QRZ {RX}
F8 Agn?,{TX}{ENTER}agn? agn? {RX}
F9 2Exch,{TX}{ENTER}{SENTRST} {EXCH} {EXCH} {EXCH} {TIME2} {TIME2} {TIME2}
{RX}
F10 LOG,{LOG}
F11 WIPE, {WIPE}
F12 GRAB, {GRAB}
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|