Rich,
A little more info of your setup: Are you trying to setup AFSK or FSK keying?
Let me suggest that you post your query on the "Hamlogger" group. Its very
possible that a Logger32 user has a 7100 and already setup MMTTY.
I do not have an IC7100, but I am familiar with the Logger32 Sound card setup
to interface with MMTTY. I may be of some help pointing you in the right
directon.
73, Jim – w5ifp@gvtc.com
>> -----Original Message-----
>> From: RTTY [mailto:rtty-bounces@contesting.com] On Behalf Of
>> Rich via RTTY
>> Sent: Tuesday, June 21, 2016 2:46 PM
>> To: rtty@contesting.com
>> Subject: [RTTY] IC-7100 interface issues with Logger32 / MMTTY
>>
>> I havebeen using my IC-7100’s RTTY tx memory banks whilst
>> receiving data on theLogger32’s MMTTY Sound card window. I
>> would like to use the MMTTYprogramme to transmit as well but Ive
>> been unsuccessful in configuring itsomehow. I have trawled the
>> help and set up files as well as the archives forMMTTY and IC-7100
>> configuration settings and tried a number of suggested settings
>> without success. Im able to key the rig but never get a
>> responsebut usually get a quick reply on a quiet band once I use the
>> rig’s memory bank.Could someone with the same setup please
>> help me with details of their savedMMTTY profile and details of
>> their rig set up as there appears to be so manyvariables involved..
>> Incidentally the USB drivers were loaded as perinstructions and are
>> on Com 3 (controls the rig fine) and Com 4.
>>
>> Rich MW0CPZ
>> _______________________________________________
>> RTTY mailing list
>> RTTY@contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|