RTTY
[Top] [All Lists]

Re: [RTTY] bandpass filters

To: ww3s@zoominternet.net, rtty@contesting.com
Subject: Re: [RTTY] bandpass filters
From: k3mm@verizon.net
Date: Tue, 22 Mar 2016 12:30:44 -0500 (CDT)
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
 I've been using the Dunestar 600s for years at 60 to 100 watts throughput for 
almost 20 years.  They had some issues  early on with caps frying for multiple 
reasons.  As with any of these bandpass filters, do not use an antenna tuner on 
the radio side of the filters.  This can put undue stress (voltage) across the 
caps if there is a mismatch and will definitely blow them up.  This includes 
the tuner built into your rig.  Never activate it if you are using BPFs.


Ty K3MM
 

On 03/18/16, WW3S wrote:

Whats everyone using for low power rtty contesting? 

Anyone using Dunestar and pushing 100w to them? How about the newer Hamation 
419? 

Or does everyone throttle back to 80-85w, or push 100w? 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>