RTTY
[Top] [All Lists]

Re: [RTTY] TS 450 configuration

To: rtty@contesting.com
Subject: Re: [RTTY] TS 450 configuration
From: Tom Osborne <w7why@frontier.com>
Date: Sun, 11 Jan 2015 14:08:33 -0800
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Yes - you definitely want to do FSK with the TS-450. You can use the narrow filters that way. In AFSK you are stuck with the SSB filters.73
Tom W7WHY


On 1/11/2015 4:51 AM, Radio wrote:
Tnx Ron and Pete. It wouldn't be smart to disregard the fsk natural option of 
the 450. I will give a try.

73

Seba

El 09/01/2015, a las 16:32, "Ron Ellis" <KH6DV@hawaiiantel.net> escribió:

Seba
Years ago I used AFSK with my 450S but through the mic connector afterall it is
audio. Later I went to FSK which the 450 does very well and the advantage is 
that
your dial matches the DX spots listed on DXSummit.  N1MM is not that hard to 
setup
for FSK read and follow the tutorials on RTTYCONTESTING.COM from AA5AU.
I did this with my new TS-590S from the AA5AU web site, N1MM classic + MMTTY
RTTY engine and a second decoder window using TwoTone all from the tutorials and
and the info from my Rigblaster Advantage modem manual, it worked the 1st time 
out.


GL es CU on RTTY
Ron KH6DV
Kaneohe Bay, Oahu Hawaii

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
<Prev in Thread] Current Thread [Next in Thread>