1. Writelog & spots for Makrothen ( pcooper)
2. Re: Writelog & spots for Makrothen ( pcooper)
3. Re: Writelog & spots for Makrothen (Gary AL9A)
4. Re: Writelog & spots for Makrothen (Phil Cooper)
----------------------------------------------------------------------
Message: 1
Date: Sat, 11 Oct 2014 10:02:29 -0700
From: " pcooper" <pcooper@guernsey.net>
To: <rtty@contesting.com>
Subject: [RTTY] Writelog & spots for Makrothen
Message-ID: <20141011100229.8BCEE7CA@m0005297.ppops.net>
Content-Type: text/plain; charset="UTF-8"
Hi all,
I am not sure whether this is a bug with WL v11.22G or not...
If I work stations on - say - 15m, then change bands, and later go back to
15m, stations that were previously worked on 15m are now showing as not
yet worked.
Anyone else seeing this too?
73 de Phil GU0SUP
------------------------------
Message: 2
Date: Sat, 11 Oct 2014 10:07:04 -0700
From: " pcooper" <pcooper@guernsey.net>
To: <rtty@contesting.com>
Cc: <rtty@contesting.com>
Subject: Re: [RTTY] Writelog & spots for Makrothen
Message-ID: <20141011100704.8BD01020@m0005312.ppops.net>
Content-Type: text/plain; charset="UTF-8"
Hi again,
I should have said that the spots aren't showing up as worked in the
BANDMAP.
In the Rx window, they do, it's just the bandmap that is showing them as
not yet worked.
73 de Phil GU0SUP
------------------------------
Message: 3
Date: Sat, 11 Oct 2014 09:15:40 -0800
From: "Gary AL9A" <al9a@mtaonline.net>
To: " pcooper" <pcooper@guernsey.net>, <rtty@contesting.com>
Subject: Re: [RTTY] Writelog & spots for Makrothen
Message-ID: <8EEA02B80C844B49B9725933CA426037@AL9APC>
Content-Type: text/plain; format=flowed; charset="iso-8859-1";
reply-type=original
Phil,
I'm noticing problems too. In addition to worked stations not always
showing as dupes in the Band Map, last night when I clicked on several
spots
in the RTTY segment my radio mode was shifted from RTTY to CW! These
should
all be RTTY spots as I am filtering the spots from VE7CC-1 to just the
RTTY
sub-bands and also filtering out any that indicate CW in the spot.
Something is amiss!
73,
Gary AL9A
-----Original Message-----
From: pcooper
Sent: October 11, 2014 9:02 AM
To: rtty@contesting.com
Subject: [RTTY] Writelog & spots for Makrothen
Hi all,
I am not sure whether this is a bug with WL v11.22G or not...
If I work stations on - say - 15m, then change bands, and later go back to
15m, stations that were previously worked on 15m are now showing as not
yet
worked.
Anyone else seeing this too?
73 de Phil GU0SUP
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
------------------------------
Message: 4
Date: Sat, 11 Oct 2014 22:38:47 +0100
From: "Phil Cooper" <pcooper@guernsey.net>
To: "'Gary AL9A'" <al9a@mtaonline.net>, <rtty@contesting.com>
Cc: writelog@contesting.com
Subject: Re: [RTTY] Writelog & spots for Makrothen
Message-ID: <002401cfe59b$beb94c20$3c2be460$@guernsey.net>
Content-Type: text/plain; charset="us-ascii"
Gary and the group,
Yup, I also found that "some" spots - when clicked on - moved the rig to
CW.
At one point, I saw VA2UP, clicked on his spot, and it turned to CW, but
when I clicked on another spot, the rig went back to RTTY.
I also noted that I had worked NS9I, and the bandmap showed this call in
red, but another spot came up, with a different QRG, and I then had NS9I
twice on the bandmap, one in red, and one in blue/green, indicating not
worked.
I'm not sure if it is just this module, or the new version of Writelog,
but
something is definitely flakey currently.
I don't recall this problem in previous years, so something has changed.
Perhaps others will find similar once this session is over.
I'll be back on air tomorrow............
73 de Phil GU0SUP