RTTY
[Top] [All Lists]

Re: [RTTY] BARTG 75 Sprint Calls

To: rtty@contesting.com
Subject: Re: [RTTY] BARTG 75 Sprint Calls
From: "Joe Subich, W4TV" <lists@subich.com>
Date: Wed, 24 Sep 2014 13:19:26 -0400
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>

On my MMTTY Setup, the "HAM" button not only sets the tones back to
default but it also puts it back to 45 baud.

Simple solution ... on MMTTY's Setup | Demodulator tab *uncheck* the
box that says "Fixes 45.45 baud" and "HAM" will not reset the data
rate.

73,

   ... Joe, W4TV


On 2014-09-24 11:22 AM, Tim Shoppa wrote:
Gary writes:
I had a couple of times last weekend where I would set
MMTTY at 75 baud and then after a couple of QSOs I
could only get garbage.  When I went back to the MMTTY
setup screens I found that somehow the 75 speed
setting had reverted back to 45!  This happened a couple
of time to me.

On my MMTTY Setup, the "HAM" button not only sets the tones back to default
but it also puts it back to 45 baud. I had developed the habit of hitting
"HAM" whenever I wanted to disable or reset AFC.

Tim N3QE
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>