I recently did a reset on my netbook which completely cleaned the hard drive
and reinstalled Windows, so I had to go thru and reinstall all of my
programs. One of them is MMTTY, which I now seem to be having some trouble
with. It defaults to Mark and Space frequencies above 2000hz with the
normal shift of 170hz.
However, I like to listen to RTTY at a lower pitch, like 500hz or so. To do
this, I click on the waterfall until the signal appears around this
frequency. It shows 500hz or so on the MARK box. When I go to transmit, it
takes the MARK back to 2125hz. I don't think it did this before, but I
don't remember for sure. Anyways, I can't seem to contact anyone now unless
I tune the RTTY signal in at 2125hz as well.
What do I need to do differently to get MMTTY working like it used to
before?
73 John AF5CC
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|