RTTY
[Top] [All Lists]

Re: [RTTY] RTTY N1MM Logger questions

To: rtty@contesting.com
Subject: Re: [RTTY] RTTY N1MM Logger questions
From: W0MU Mike Fatchett <w0mu@w0mu.com>
Date: Mon, 12 May 2014 08:02:27 -0600
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
RTTY spotting is a problem. I see tons of spots that say CW which are really RTTY or other Digital modes.

The info window will let you know when you are spotted. You should also see something in the bandmap that shows where you are running.

Head over to the N1MM group.

Mike W0MU

On 5/12/2014 7:49 AM, iw1ayd - Salvatore Irato wrote:
Hi Dick and all.

For the #1 I have adopted a plain solution. Out of any filter command that could be made and then stored into the Telnet window macro buttons I use only the RCK-DCS - RCK Digital Cluster System. Much easy and useful for RTTY only, just one command to get rid of any other mode, CW. Still PSK is coming in, as with some more exotic modes, but this would depend much more on entries tagging,
thus the inability to filter out all things. At least in mine knowledge.

More on:

http://www.walter-dallmeier.de/software-by-dl4rck/rckskimmer/digital-cluster-system/

BTW there are both, skimmers and not skimmers - human - entries: quick and dirty.

For the #2, no way on the band map, but what Rich, VE3KI, wrote is enough to get known when you are spotted. Again in the N1MM Logger Info windows there are both evidences for spots. Those generated by the skimmers and those by humans. Yours callsign on air is the key to select spots to be shown there.

Hope that I added some more to the already exhaustive Rich responses, not just wasting bandwidth ;-)

       73 de iw1ayd Salvo


On 12/05/2014 15:01, rtty-request@contesting.com wrote:
Message: 5
Date: Mon, 12 May 2014 01:37:26 -0400 (EDT)
From: RLVZ--- via RTTY<rtty@contesting.com>
To:rtty@contesting.com
Subject: [RTTY] RTTY N1MM Logger questions
Message-ID:<bd3bd.377b2474.40a1b816@aol.com>
Content-Type: text/plain; charset="US-ASCII"

Hi Guys,
Wondering if a N1MM Logger person could answer the following questions
regarding RTTY operations while using N1MM Logger  software:
1) Is there a skimmer filter that can be used so that only RTTY skimmer spots are posted to my band map window? (I'd like CW skimmer spots deleted) 2) Currently, my Callsign is not shown in the band map window when I'm spotted. Is there a way I can turn that feature on? (I want to make sure
that I don't QSY shortly after being  spotted)
  Thanks & 73-
  Dick- K9OM

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>