RTTY
[Top] [All Lists]

Re: [RTTY] PROIII, MMTTY and New computer without serial or parallel por

To: <aa5au@bellsouth.net>, <rtty@contesting.com>
Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or parallel ports
From: "G. E. Janssens - K5WW" <k5ww@live.com>
Date: Mon, 21 May 2012 16:59:38 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
PCI slots have been on their way out for a while now, at least when it comes to 
the models from the big brands.
 
If someone really wants a computer with (lots of) PCI slots then the only 
option is to build your own. It's really not that hard.
 
Newegg.com has over 100 Intel compatible motherboards with one or more PCI 
slot; and has over 50 AMD compatible boards with one or more PCI slot. Many of 
those come with more warranty than "the big guys" will ever give you...
 
73,
 
Erik - K5WW

 

> From: aa5au@bellsouth.net
> To: rtty@contesting.com
> Date: Mon, 21 May 2012 14:41:47 -0500
> Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or parallel 
> ports
> 
> While shopping for a new desktop computer, I found that most come with PCI 
> Express slots which are different than PCI slots. Some
> computers may have a combination of PCI and PCI Express. But the newer ones I 
> looked at only had PCI Express slots.
> 
> Maybe PCI slots are being phased out.
> 
> 73, Don AA5AU
> 
> -----Original Message-----
> From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On 
> Behalf Of Terry Dunlap
> Sent: Monday, May 21, 2012 12:08 PM
> To: Jim W7RY
> Cc: rtty@contesting.com
> Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or parallel 
> ports
> 
> Are PCI slots still the norm on new PCs? I thought they were basically phased 
> out.
> 
> 73 de Terry KK6T
> 
> On 5/20/2012 7:44 PM, Jim W7RY wrote:
> > This is what I ordered for my new Dell desktop. Works great for FSK 
> > (45.5 baud 5 bit) as well as PTT and CW.
> >
> >
> > Syba SD-PCI15029 8 Serial (RS-232) MultiPort PCI-Bus Card with 25-pin 
> > Octopus Cable
> >
> > Ordered it from Amazon. Cheap enough and LOTS of ports!
> >
> > 73
> > Jim W7RY
> >
> >
> > -----Original Message-----
> > From: rlauer1@columbus.rr.com
> > Sent: Sunday, May 20, 2012 9:38 AM
> > To: rtty@contesting.com ; allan1@dejazzd.com
> > Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or 
> > parallel ports
> >
> > I just went through this due to a lightning strike. If the computer is 
> > a desktop, and you have a slot available I would recommend the 
> > Rosewill RC-305E. I bought mine from www.newegg.com. I tried a 
> > different serial card that I was able to buy from a local store but it did 
> > not support rtty.
> >
> > Hope that helps you out.
> >
> > Bob
> > K8ZD
> >
> >
> > ---- allan1@dejazzd.com wrote:
> >> I ha d to finally (after ten years) get a new computer which has 
> >> onlly USB Ports.
> >>
> >> I used to have the PRO III hooked up through ACC1 to my old computer 
> >> for MMTTY. How to I hook things up now for MMTTY without a serial port?
> >>
> >> All help is greatly appreciated!
> >>
> >> Allan W2TN
> >> _______________________________________________
> >> RTTY mailing list
> >> RTTY@contesting.com
> >> http://lists.contesting.com/mailman/listinfo/rtty
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
                                          
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>