This is what I ordered for my new Dell desktop. Works great for FSK (45.5
baud 5 bit) as well as PTT and CW.
Syba SD-PCI15029 8 Serial (RS-232) MultiPort PCI-Bus Card with 25-pin
Octopus Cable
Ordered it from Amazon. Cheap enough and LOTS of ports!
73
Jim W7RY
-----Original Message-----
From: rlauer1@columbus.rr.com
Sent: Sunday, May 20, 2012 9:38 AM
To: rtty@contesting.com ; allan1@dejazzd.com
Subject: Re: [RTTY] PROIII, MMTTY and New computer without serial or
parallel ports
I just went through this due to a lightning strike. If the computer is a
desktop, and you have a slot available I would recommend the Rosewill
RC-305E. I bought mine from www.newegg.com. I tried a different serial card
that I was able to buy from a local store but it did not support rtty.
Hope that helps you out.
Bob
K8ZD
---- allan1@dejazzd.com wrote:
> I ha d to finally (after ten years) get a new computer which has onlly USB
> Ports.
>
> I used to have the PRO III hooked up through ACC1 to my old computer for
> MMTTY. How to I hook things up now for MMTTY without a serial port?
>
> All help is greatly appreciated!
>
> Allan W2TN
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|