I use a FT-920 with an original Microkeyer when in VP9....it works, but it's
a bear to setup.....first off, transmit the whole alphabet, and see if you
can copy any of the letters...if you can copy half of them,but not the
other, good chance ther pullup resistor in the 920 went bad....I'm not sure
about the MKII, but with my microkeyer, I had to open the cable up and short
2 pins together, that cured it, W4TV could probably tell you if the same
thing with work with a MKII.....but try typing and transmitting the whole
alphabet string, and see what gets decoded in the other rig....I think in my
case, all the missing characters ended in a space, and that bad pullup
resistor was causing trouble...
On 5/9/2012 1:53:06 AM, Stein-Roar Brobakken (sroabr@online.no) wrote:
> Hi
>
>
> Is there anyone out which have used FT-920 with FSK RTTY?
>
> I got a FT920 in shack to test for RTTY.
> I have tried to setup mine with a microHAM MKII..switched the radio to
> FSK
> and standard settings..2125 , 170 and also tried with setup in MMTTY..
> But I am not able to copy my sent RTTY at the other end...
> I do see the two spaced tones, but it's not quality RTTY and not able to
> decode it with another transceiver.. and I can either work any QSO :(
>
> Any suggestions????
>
> 73s LA6FJA Rag
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2012.0.2171 / Virus Database: 2425/4985 - Release Date: 05/08/12
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|