RTTY
[Top] [All Lists]

Re: [RTTY] Multiple Decoders

To: <rtty@contesting.com>
Subject: Re: [RTTY] Multiple Decoders
From: "Don Hill AA5AU" <aa5au@bellsouth.net>
Date: Wed, 1 Feb 2012 21:20:04 -0600
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
It's not normal for callsigns not to highlight in the clone window using 
WriteLog.  They should highlight.  Not sure what's up with
that.

This is the exact way I route my audio, through an NIR-12 on each radio.  Works 
great!

73, Don AA5AU

-----Original Message-----
From: rtty-bounces@contesting.com [mailto:rtty-bounces@contesting.com] On 
Behalf Of john@kk9a.com
Sent: Wednesday, February 01, 2012 9:14 PM
To: rtty@contesting.com
Cc: dick@k7vc.com
Subject: Re: [RTTY] Multiple Decoders

Like many others that already replied, I agree that it certainly is possible 
to run multiple decoders with one radio.  There are many ways to set this 
up. For 2011 CQWW RTTY I added a DXP38 to my station and I used the 
headphone audio for that decoder.  I ran it though a JPS NIR-12 filter which 
has a separate headphone jack and headphone volume control.  You could also 
split the audio from your existing source with a Y cable like many already 
suggested.  I opened a separate Writelog rttyrite window for the DXP38, the 
only issue is callsigns did not highlight like they do with MTTY.  I'm 
assuming that this is normal?

John KK9A

Subject: [RTTY] Multiple Decoders
From: Dick Flanagan <dick@k7vc.com>
Date: Tue, 31 Jan 2012 20:34:06 -0800

I know some folks run multiple RTTY decoders, with one of them often
being MMTTY and the other a DXP38.  Is it possible to run these two
decoders with one radio or is SO2R necessary?

Dick
--
Dick Flanagan K7VC
dick@k7vc.com 

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>