Bill....
No. It does not. The text keeps moving downward when a new line is required
or a linefeed (enter) is received.... Yes, we know all about checking the
box
to remove excessive line feeds.... But that doesn't take care of it.
Please understand fully before you say that N1MM does that too. Please
launch a digital window in Writelog and see for yourself. Or check out a
screen shot on Don's
(AA5AU) web site.
http://rttycontesting.com/writelog/mmtty/plugin_page3.htm
Thanks
73
Jim W7RY
--------------------------------------------------
From: "Bill Turner" <dezrat1242@yahoo.com>
Sent: Monday, January 16, 2012 6:43 PM
To: <rtty@contesting.com>
Subject: Re: [RTTY] (no subject)
> On 1/16/2012 4:07 PM, Dick Flanagan wrote:
>> Writelog scrolls down (not up) so you don't have to chase call signs.
>> The call sign stays in one place until the window fills and starts to
>> fill from the top again.
>> *It is too bad that N1MM doesn't have that feature.*
>>
>> Dick
>>
>
> Actually, N1MM does have that feature and has had it for a long time.
> It's just implemented differently.
>
> All you have to do is place the command {CLRRX} at the end of your macro
> and the RX screen is cleared and the cursor placed at the top left,
> ready to print onto a fresh new screen. If you want to clear the screen
> after the macro executes instead of immediately, just place the command
> {END} in front of {CLRRX}.
>
> I actually prefer it to WriteLog's implementation because you know the
> start of print is always at the top left, unlike WriteLog's, which can
> start anywhere at the left side of the print area. That's a minor point,
> but after using both for years, I prefer N1MM's way because it's less
> fatiguing after hours of operating. The new print always starts in the
> same place.
>
> It does have the drawback that once executed, it wipes the RX screen
> clean so you can not scroll back. Just be sure to capture the info
> before executing.
>
> You can place {CLRRX} at the end on just one macro, a few of them or all
> of them except F5. Placing it in the F5 macro will interfere with ESM.
>
> Try it, you'll like it. :-)
>
> 73, Bill W6WRT
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|