Hello,
The SARTG WW-rules, on web-page says:
Class A: Single Operator / Single TX / All Band
NOTE 3: "Single TX" means only one transmitted signal is allowed on air at
the same time.
The Cabrillo file-exampel will be updated and corrected, tnx for info.
73 de Ewe SM7BHM
SARTG Contest manager
-----Ursprungligt meddelande-----
From: David Levine
Sent: Sunday, August 21, 2011 6:26 PM
To: RTTY Reflector
Subject: [RTTY] SARTG Category for Cabrillo?
Looking at the SRATG rules listed at
http://www.sartg.com/contest/wwrules.htm it shows the following entry
classes:
A: Single Operator / Single TX / All Band
B: Single Operator / Single Band
C: Multi Operator / Single TX / All Band
D: SWL / All Band
E: Single Operator / Single TX / All Band / Low Power (max 100 Watts)
When I look at the example cabrillo file referenced in the rules at
http://www.sartg.com/contest/wwcabril.htm I don't see anything referencing
class A. The cabrllo file example shows the standard categories:
CATEGORY: operator-category band-category power-category mode
For SARTG-WW-contest the operator-category must be one of the following:
SINGLE-OP, MULTI-ONE, SWL or CHECKLOG.
Anyone have any info on what the cabrillo file needs to show to enter in
class A - single op / single TX?
Many thanks,
K2DSL - David
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|