HELLO ALL
I used WriteLog with MMTTY for the first time in the JARTS Contest this past
weekend. Overall I am very pleased with WriteLog, but I was unable to keep the
CAT connection up with the transceiver. WriteLog would connect for a minute or
so and function properly but then it would loose communications with the
transceiver and show NO RIG. (Not an RFI issue since the problem occurs in the
receive mode) I had the same problem with MMTTY running alone. I was able to
solve the problem by setting the polling interval to 2 sec. The help file in
WriteLog suggests unchecking the poll box if the CAT function operates
erratically. When I did this I was unable to get the CAT function to work at
all. The help file says that with the poll box unchecked the software will only
poll the transceiver when dupe checking. I found the the CAT function did not
function and the dupe checking was incorrect.
The setup is a KENWOOD TS570D and a NAVIGATIOR interface. CAT works fine when
using MixW so the problem is not with the rig or the interface.
If anyone has any suggestions on how I can get CAT to work with WriteLog I
would appreciate the help. Thanks in advance
73
Sid KK8X
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|