> > > COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
> >
> > ALWAYS, ALWAYS, ALWAYS, set Comm PTT: NO.
> >
> I set this to NO in Writelog and now I don't have PTT at all.
>
Then you have other problems in your configuration. Assuming
this is with MMTTY and Writelog see the example configuration
at: www.microham.com/Downloads/MK2R_WriteLog_USB_%20Setup.pdf
> Should Com5 (my FSK port) have it Writelog Comm PTT set to NO?
>
> Router has FSK: COM5, PTT checked.
"Comm PTT" is only valid for radio ports.
Is Router detecting the correct mode, does the FSK/Digital PTT
setting have the black box around it?
See the MK2R+ manual:
www.microham.com/Downloads/MK2R_English_Manual.pdf
and the WriteLog help files.
73,
... Joe, W4TV
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> Sent: Saturday, February 13, 2010 6:21 PM
> To: Joe Subich, W4TV; rtty@contesting.com
> Subject: Re: [RTTY] Radio stops sending messages
>
>
> On 13 Feb 2010 at 16:38, Joe Subich, W4TV wrote:
>
> >
> > > COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
> >
> > ALWAYS, ALWAYS, ALWAYS, set Comm PTT: NO.
> >
> I set this to NO in Writelog and now I don't have PTT at all.
>
> Should Com5 (my FSK port) have it Writelog Comm PTT set to NO?
>
> Router has FSK: COM5, PTT checked.
>
> Also in the Router's PTT Tab, FSK/Digital: PTT2 (rear panel jack) is
> selected.
>
> I am sorry to be so hard headed about this, but it is not working.
>
> Jim/KC4HW
>
>
>
> > Writelog does not time the RTTY data but simply dumps it
> > to the buffer. When Writelog has finished dumping data to
> > the buffer it drops PTT (sends a PTT OFF command via CAT).
> > It is the CAT PTT OFF that is causing the FT-2000 to stop
> > transmitting before the message is finished.
> >
> > BTW, with WriteLog it is usually wise to add a couple
> > spaces to the end of every message to provide a bit of a
> > tail to prevent a "too quick" PTT drop.
> >
> > > I could not find a PTT setting in MMTTY and I thought that
> > > Writelog or Router handled the PTT function.
> >
> > MMTTY always asserts PTT on the FSK port (in previous versions
> > of MMTTY, the "FSK" port on the TX tab was even labeled PTT
> > Port). Router never handles PTT independently, it only passes
> > the status of DTR on the FSK or PTT ports.
> >
> > 73,
> >
> > ... Joe, W4TV
> >
> >
> >
> >
> > > -----Original Message-----
> > > From: rtty-bounces@contesting.com
> > > [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> > > Sent: Saturday, February 13, 2010 11:50 AM
> > > To: rtty@contesting.com
> > > Subject: Re: [RTTY] Radio stops sending messages
> > >
> > >
> > > I did check MMTTY, MISC, and USB PORT is selected for C: Limiting
> > > Speed.
> > >
> > > I am not sure that I understand about the PTT in MMTTY
> and not the
> > > Writelog PTT ont he CW port????
> > >
> > > My setup is:
> > >
> > > MK2R+, router 7.2.4
> > > FT-2000D, CAT on COM3 and FSK on COM5 (ptt checked) showing
> > > 45 5N1.5
> > >
> > > Writelog, v 10.69D, with SETUP, PORTS:
> > > COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES COM5, No
> > > Rig, AUTO, POLL CHECKED, Comm PTT: Yes
> > >
> > > MMTTY v 1.66G
> > > I could not find a PTT setting in MMTTY and I thought that
> > > Writelog or
> > > Router handled the PTT function.
> > >
> > > The problem: Is that the the radio is unkeying before
> the message
> > > is completed. It does not unkey at the same place in the message
> > > everytime and sometimes not at all. But it does it more
> times than
> > > not. Actually, MMTTY shows that the message is still
> transmitting,
> > > so does the MK2R+ with the CW/FSK and PTT LEDs, but the
> radio will
> > > unkey before the message is completed.
> > >
> > > Still need some help. Anyone got any suggestion.
> > >
> > > Thanks in advance
> > >
> > > Jim/KC4HW
> > >
> > >
> > >
> > > On 13 Feb 2010 at 0:48, Joe Subich, W4TV wrote:
> > >
> > > >
> > > > In MMTTY, open the MISC tab (in set-up) and click the
> "USB Port"
> > > > button. Select "C: Limiting Speed" ... also use the PTT from
> > > > MMTTY (DTR on the same port at FSK) and not the WriteLog PTT on
> > > the CW port.
> > > >
> > > >
> > > > 73,
> > > >
> > > > ... Joe, W4TV
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > > -----Original Message-----
> > > > > From: rtty-bounces@contesting.com
> > > > > [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> > > > > Sent: Friday, February 12, 2010 7:13 PM
> > > > > To: rtty@contesting.com
> > > > > Subject: [RTTY] Radio stops sending messages
> > > > >
> > > > >
> > > > > Well it appears that the message in Writelog are
> stopping before
> > > > > they are completely sent.
> > > > >
> > > > > Using Writelog and MMTTY...
> > > > >
> > > > > any suggestions..
> > > > >
> > > > >
> > > > > Jim/KC4HW
> > > _______________________________________________
> > > RTTY mailing list
> > > RTTY@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/rtty
> >
>
>
> Jim/KC4HW
> http://www.AlabamaContestGroup.org
> http://www.AlabamaQSOParty.org
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|