On 13 Feb 2010 at 16:38, Joe Subich, W4TV wrote:
>
> > COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
>
> ALWAYS, ALWAYS, ALWAYS, set Comm PTT: NO.
>
I set this to NO in Writelog and now I don't have PTT at all.
Should Com5 (my FSK port) have it Writelog Comm PTT set to NO?
Router has FSK: COM5, PTT checked.
Also in the Router's PTT Tab, FSK/Digital: PTT2 (rear panel jack) is
selected.
I am sorry to be so hard headed about this, but it is not working.
Jim/KC4HW
> Writelog does not time the RTTY data but simply dumps it
> to the buffer. When Writelog has finished dumping data to
> the buffer it drops PTT (sends a PTT OFF command via CAT).
> It is the CAT PTT OFF that is causing the FT-2000 to stop
> transmitting before the message is finished.
>
> BTW, with WriteLog it is usually wise to add a couple
> spaces to the end of every message to provide a bit of a
> tail to prevent a "too quick" PTT drop.
>
> > I could not find a PTT setting in MMTTY and I thought that
> > Writelog or Router handled the PTT function.
>
> MMTTY always asserts PTT on the FSK port (in previous versions
> of MMTTY, the "FSK" port on the TX tab was even labeled PTT
> Port). Router never handles PTT independently, it only passes
> the status of DTR on the FSK or PTT ports.
>
> 73,
>
> ... Joe, W4TV
>
>
>
>
> > -----Original Message-----
> > From: rtty-bounces@contesting.com
> > [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> > Sent: Saturday, February 13, 2010 11:50 AM
> > To: rtty@contesting.com
> > Subject: Re: [RTTY] Radio stops sending messages
> >
> >
> > I did check MMTTY, MISC, and USB PORT is selected for C: Limiting
> > Speed.
> >
> > I am not sure that I understand about the PTT in MMTTY and not the
> > Writelog PTT ont he CW port????
> >
> > My setup is:
> >
> > MK2R+, router 7.2.4
> > FT-2000D, CAT on COM3 and FSK on COM5 (ptt checked) showing
> > 45 5N1.5
> >
> > Writelog, v 10.69D, with SETUP, PORTS:
> > COM3, YAESUE FT-2000, 4800, POLL CHECKED, Comm PTT: YES
> > COM5, No Rig, AUTO, POLL CHECKED, Comm PTT: Yes
> >
> > MMTTY v 1.66G
> > I could not find a PTT setting in MMTTY and I thought that
> > Writelog or
> > Router handled the PTT function.
> >
> > The problem: Is that the the radio is unkeying before the message
> > is completed. It does not unkey at the same place in the message
> > everytime and sometimes not at all. But it does it more times than
> > not. Actually, MMTTY shows that the message is still transmitting,
> > so does the MK2R+ with the CW/FSK and PTT LEDs, but the radio will
> > unkey before the message is completed.
> >
> > Still need some help. Anyone got any suggestion.
> >
> > Thanks in advance
> >
> > Jim/KC4HW
> >
> >
> >
> > On 13 Feb 2010 at 0:48, Joe Subich, W4TV wrote:
> >
> > >
> > > In MMTTY, open the MISC tab (in set-up) and click the "USB Port"
> > > button. Select "C: Limiting Speed" ... also use the PTT from
> > > MMTTY (DTR on the same port at FSK) and not the WriteLog PTT on
> > the CW port.
> > >
> > >
> > > 73,
> > >
> > > ... Joe, W4TV
> > >
> > >
> > >
> > >
> > >
> > > > -----Original Message-----
> > > > From: rtty-bounces@contesting.com
> > > > [mailto:rtty-bounces@contesting.com] On Behalf Of KC4HW
> > > > Sent: Friday, February 12, 2010 7:13 PM
> > > > To: rtty@contesting.com
> > > > Subject: [RTTY] Radio stops sending messages
> > > >
> > > >
> > > > Well it appears that the message in Writelog are stopping before
> > > > they are completely sent.
> > > >
> > > > Using Writelog and MMTTY...
> > > >
> > > > any suggestions..
> > > >
> > > >
> > > > Jim/KC4HW
> > _______________________________________________
> > RTTY mailing list
> > RTTY@contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
>
Jim/KC4HW
http://www.AlabamaContestGroup.org
http://www.AlabamaQSOParty.org
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|