RTTY
[Top] [All Lists]

Re: [RTTY] Writelog/Microham Interfacer III

To: "'JOHN HEADLEY'" <w0kxz@brookings.net>, <rtty@contesting.com>
Subject: Re: [RTTY] Writelog/Microham Interfacer III
From: "Joe Subich, W4TV" <lists@subich.com>
Reply-to: lists@subich.com
Date: Sun, 24 Jan 2010 23:46:04 -0500
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
Get the file u2_Writelog_setup.pdf from the files area of the 
microHAM list on Yahoo (http://groups.yahoo.com/group/microHAM) 
or via the "Help | Download Documents" link in microHAM Router. 

Since the WriteLog plug-in for MMTTY does not support EXTFSK, 
you need to use WriteLog's "Software generated FSK (DTR)" for 
FSK transmit along with the MMTTY receive.  The set-up file 
shows the configuration. 

> I only get a mark tone when I key the "TX" button on the "RTTY 
> CONTROL PANEL"  No FSK.

The "Control" panel in MMTTY is not functional with WriteLog and 
the MMTTY plug-in.  You should get FSK if you follow the configuration 
guide and use Alt-K (RTTY Keyboard) or one of the Writelog 
message macros (F1-F10).  

73, 

   ... Joe Subich, W4TV 
       microHAM America 
       http://www.microHAM-USA.com 
       http://groups.yahoo.com/group/microHAM 
       support@microham.com 
 


> -----Original Message-----
> From: rtty-bounces@contesting.com 
> [mailto:rtty-bounces@contesting.com] On Behalf Of JOHN HEADLEY
> Sent: Saturday, January 23, 2010 1:35 PM
> To: rtty@contesting.com
> Subject: [RTTY] Writelog/Microham Interfacer III
> 
> 
> My old computer crashed and died so acquired a new (refurb) 
> Dell with windows 7.
> 
> Had to start from scratch with MMTTY and Writelog.   And of 
> course no serial
> ports
> 
> on the new machine.  So I picked up a Microham Interfacer 
> III.   Have MMTTY
> running just
> 
> fine and the Plug in installed and working in Writelog.  
> However I only get a 
> 
> mark tone when I key the "TX" button on the "RTTY CONTROL  
> PANEL"  No FSK.
> 
> Also the "F-Keys don't do anything unless I hit "TYPE" and 
> then they produce
> 
> 
> A mark tone but again no shift.  I have been through AA5AU's 
> trouble shooting 
> 
> Guide on The plug in and all looks right.  The rig talks to 
> the bandmap and follows 
> 
> the tuning on the rig but no stations show up from my telnet 
> connection that
> 
> I  have always used.  The stations show on the packet window 
> however but not on
> 
> The bandmap window.  I don't think this is a related problem 
> (?)  De Jack WA0JH
> 
> _______________________________________________
> RTTY mailing list
> RTTY@contesting.com http://lists.contesting.com/mailman/listinfo/rtty

_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>