My old computer crashed and died so acquired a new (refurb) Dell with
windows 7.
Had to start from scratch with MMTTY and Writelog. And of course no serial
ports
on the new machine. So I picked up a Microham Interfacer III. Have MMTTY
running just
fine and the Plug in installed and working in Writelog. However I only get
a
mark tone when I key the "TX" button on the "RTTY CONTROL PANEL" No FSK.
Also the "F-Keys don't do anything unless I hit "TYPE" and then they produce
A mark tone but again no shift. I have been through AA5AU's trouble
shooting
Guide on The plug in and all looks right. The rig talks to the bandmap and
follows
the tuning on the rig but no stations show up from my telnet connection that
I have always used. The stations show on the packet window however but not
on
The bandmap window. I don't think this is a related problem (?) De Jack
WA0JH
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|