Joe,
Now, that was simple! I'm back in business. Many thanks.
73... Bill
-----Original Message-----
From: Joe Subich, W4TV [mailto:lists@subich.com]
Sent: Saturday, September 19, 2009 7:56 PM
To: 'Bill Axelrod'; 'RTTY Reflector'
Subject: RE: [RTTY] RTTY problems with one radio
> Am sure I'm missing something simple. Any ideas?
Check the DB37-FT-1000MP cable. Particularly, look for connection between
pin 29 of the DB37 and pin 1 of the
4 pin DIN (RTTY) plug. See the schematic:
www.microham-usa.com/Products/MK/Cables/DB37-FT-1000MP.pdf
73,
... Joe, W4TV
> -----Original Message-----
> From: rtty-bounces@contesting.com
> [mailto:rtty-bounces@contesting.com] On Behalf Of Bill Axelrod
> Sent: Saturday, September 19, 2009 6:54 PM
> To: rtty@contesting.com
> Subject: [RTTY] RTTY problems with one radio
>
>
> I have a RTTY problem that popped up out of the blue. My FT-1000 MP
> MK V suddenly stopped shifting between mark and space on FSK RTTY.
>
> This is my second radio in a SO2R station. The other radio is an
> Orion 2. I use a MicroHam MK2R+ for interface between the two radios
> and the computer. My choices of software are N1MM logger, the DX Lab
> Suite with Win Warbler, and MMTTY stand-alone.
>
> I haven't used the FT-1000MP MK V on RTTY since the last RTTY contest
> I played in.
> Have been using the Orion for routine RTTY ops. This morning I
> decided to get ready for next weekend's CQ WW DX RTTY and practice my
> SO2R a bit. So,
> I started up the N1MM logger. I hadn't changed any
> settings anywhere so
> I didn't anticipate any problems. My Radio 1 (Orion 2) works just
> fine. Radio 2 (FT-1000MP MK V) did not.
>
> All indications seem normal. The rig keys and puts out a clean
> signal. It just doesn't shift between mark and space.
> The digital window of N1MM logger shows a diddle or text while I type
> being sent. The CW/FSK light on the MK2R+ blinks as it should. The
> indications on the MK2R+ Device Router ports panel look normal for FSK
> operations,
>
> I have unplugged and re-seated each cable between the computer and
> MK2R+ and between the MK2R+ and the FT-1000MP.
>
> I tried using N1MM Logger, MMTTY stand-alone, and then Win Warbler.
> Same issue. I had taken screen shots of each option and setup window
> of all three software applications and also of the MK2R+ Device
> Router (7.2.4) in the event I had inadvertently changed a setting
> somewhere.
>
> Am sure I'm missing something simple. Any ideas?
>
> Thanks and 73... Bill ND9E
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|