Good Afternoon Ed,
Aha! Last night when I tried to upload practice session to LOTW my
Cabrillo was rejected with some comment about CA not correct. I
didn't care and just had N1MM produce an ADIF file and TQSL accepted
that. I now see that in N1MM for my sent exchange I had CA 03
instead of 03 CA. LOTW/Cabrillo problem explained.
Time for you to Kick some Butt. Good luck!
73,
Hank, W6SX
At 09:26 AM 26 09 2008, J. Edward \(Ed\) Muns wrote:
>Trey confirmed my suspicion. The log submittal robot requires the QSO
>format in the Cabrillo log to match the example on the Cabrillo web site.
>In other words the exchange order must be RST ZN ST.
>
> >From what you said, it sounds like your software will create a proper
>Cabrillo file as long as you type the exchange in this order into your
>logger's data entry window. Don't worry about the order it is sent to you,
>just enter it such that the subsequent Cabrillo log is correct.
>
>Have fun,
>Ed - P49X (W0YK)
>
>_______________________________________________
>RTTY mailing list
>RTTY@contesting.com
>http://lists.contesting.com/mailman/listinfo/rtty
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|