RTTY
[Top] [All Lists]

Re: [RTTY] Working VP6DX

To: <rtty@contesting.com>
Subject: Re: [RTTY] Working VP6DX
From: "Charles Morrison" <cfmorris@bellsouth.net>
Reply-to: cfmorris@bellsouth.net
Date: Sun, 24 Feb 2008 13:12:24 -0600
List-post: <rtty@contesting.com">mailto:rtty@contesting.com>
> Date: Sun, 24 Feb 2008 10:29:57 -0600
> From: "Peter Laws" <plaws@plaws.net>
> Subject: Re: [RTTY] Working VP6DX
> To: RTTY <rtty@contesting.com>
> On Sun, Feb 24, 2008 at 10:25 AM, Bill Turner <dezrat@copper.net> wrote:
> 
> >  They are working very high in the band on 30 meters, not a place I'd
> >  normally listen.
> >
> >  A few days ago when I worked them, according to my RX, their mark
signal
> >  was right on 10.150 and their space was 170 Hz lower. On later
> >  occasions, they were a tad lower.
> 
> OK, so 30, then.  Dunno if the ol' 5-band trap will tune up there but
> it surprised me by tuning well enough on 17 to work them there!
> 
> Thanks!
> 

Hey Peter, I had problems working them on 30 till Don told me to try my 80m
dipole.  Worked much better then my 40m yagi or tribander.  That and a Heath
tuner got them on 30, 12, and 17.  The problem I had with 30 RTTY is that I
have a birdy of some sort right on 10.149, which is where they were
transmitting.  The one night that I worked them, it miraculously shifted
down to 10.148, and I could hear them. 100 watts and a zillion:1 swr.

Charlie
Ki5xp


_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty

<Prev in Thread] Current Thread [Next in Thread>