This is probably too obvious, but are any of the files that were put in the
C:\F5U103 folder .EXE or .BAT files? If so, you probably have to run one to
make W98 see the adapter and install the driver. If not, then you will have
to go to Control Panel, click Add Hardware, and go thru the manual process
of installing a device from a list, and the driver for that device from a
specific location (C:\F5U103)
73 de KA3HSW
----- Original Message -----
From: "GARY ELLIOT" <k7ox@msn.com>
To: <rtty@contesting.com>
Sent: Thursday, January 11, 2007 4:54 PM
Subject: [RTTY] Belkin Serial Port F5U103
> Hello Group,
>
> I have a Belkin F5U103 USB to Serial Port adaptor and trying to install it
> on a WIN98SE machine. I downloaded the drivers for WIN98 from the Belkin
> web site and ran the .EXE file which installed several files on my HD in
> my root directory C:\F5U103. I then plugged in the USB line to the F5U103
> and rebooted my computer. While it was booting up I saw the LEDS in front
> of the converter blinking but when the computer finished booting up none
> of the LEDS in front were lit. When I go to DEVICE Manager I do not see
> any new comm port.
>
> Obviously doing something wrong ! Anybody out there using a F5U103 with a
> WIN98SE machine who could help me here ? Appreciate any
> comments/suggestions. Thanks.
>
> 73 Gary K7OX
>
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|